Chapter 5 Q-EKM Server Operation and Configuration
Q-EKM Server Commands
Quantum Encryption Key Manager Service and Installation Manual 30
Displaying the Q-EKM
Software Version 5
The Q-EKM software version is displayed in the first line of the Q-EKM
commands menu (see Logging On to Q-EKM Commands
on page 27).
You can also find the software version listed in the
qekm_version file
located in the
QEKM directory:
Displaying the Q-EKM
Server On/Off Status 5
Displays whether Q-EKM server is running or stopped.
1 Log on to Q-EKM Commands (see Logging On to Q-EKM
Commands on page 27).
2 At the Enter Command prompt, enter
1. You receive one of the
following two responses:
• If the Q-EKM server is running, you receive confirmation that
looks similar to the following:
Server is running. TCP port: 3801, SSL port: 443
• If the Q-EKM server is not running, you receive the following:
EKM server cannot be reached. It appears to be stopped.
3 Press <Enter> to return to the command menu.
Stopping the Q-EKM
Server Process 5
Stops the Q-EKM server process.
1 Log on to Q-EKM Commands (see Logging On to Q-EKM
Commands on page 27).
2 At the Enter Command prompt, enter
2.
The server shuts down and you receive confirmation that looks
similar to the following:
EKMServer: shut down complete.
3 Press <Enter> to return to the command menu.
Starting the Q-EKM
Server Process 5
Starts the Q-EKM server process.
1 Log on to Q-EKM Commands (see Logging On to Q-EKM
Commands on page 27).
Windows c:\Program Files\Quantum\QEKM
Linux /opt/Quantum/QEKM
Comments to this Manuals