Quantum Q-EKM User's Guide download pdf (Page 35)

Upgrading Q-EKM

Quantum Encryption Key Manager User’s Guide 22

9 If the Q-EKM server is running, you are prompted for the Q-EKM

admin password. Enter the password (see Q-EKM Admin Password

on page 25). If the Q-EKM server is not running, no password is

requested.

The Q-EKM server process confirms it is stopped.

10 When prompted, press

<Enter>.

The old JRE is removed and a new one is installed. This may take a

few minutes. The Q-EKM server process restarts. When the upgrade

process is complete, you are prompted to press

<Enter>.

11 When prompted, press

<Enter>.

The command window may close.

12 Log on to Q-EKM Commands to verify the new version is installed

(the version displays at the top of the command menu). See Logging

On to Q-EKM Commands on page 27 for instructions.

13 Verify the Q-EKM server process started by doing one of the

following:

•Issue the

Display the Q-EKM server status command (see

Displaying the Q-EKM Server On/Off Status

on page 30), or

•Check the

native_stdout.log file (located in the keymanager folder

in the

QEKM directory; see Standard Out Messages Log on

page 66).

14 On all libraries that access the Q-EKM server, make the following

configuration changes (see your library user’s guide or online help

for instructions):

a If you disabled automatic EKM path diagnostics earlier, then

re-enable it.

b Turn all partitions configured for library managed encryption

online.

15 Resume host I/O communication to the Q-EKM server.

16 Repeat this process on the other Q-EKM server in the Q-EKM server

pair.

17 Run EKM Path Diagnostics to verify both Q-EKM servers and the

library are connected and working together as they should (see your

library user’s guide or online help for instructions).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 92 93

Comments to this Manuals

No comments

Quantum Q-EKM User's Guide Page 35

Comments to this Manuals

Related products and manuals for Tape auto loaders & libraries Quantum Q-EKM