Chapter 2 Basic Library Operations
OCP Components
Quantum Scalar 50 User’s Guide 56
The Network screen allows you to view or edit the following network
settings:
•DHCP (default setting)
•IP address
•Subnet mask
• Default gateway
•Ethernet 0
2 Use the up and down arrows to select the network setting you wish
to view or edit and press
Enter.
a To enable/disable DHCP, press Yes to enable DHCP or No to
disable DHCP. If your library is not connected to a network
which uses a DHCP server to assign IP information, disable this
function.
b To set the IP address, subnet mask, and gateway, use the up and
down arrows to select the appropriate number and press
Enter to
accept.
3 When you are finished viewing/editing the network information,
press
Exit to return to the Setup screen.
Date and Time 2
To view or edit the date and time information:
1 From the Setup screen, use the up and down arrows to highlight Date
and Time
and press Enter.
The Date and Time screen displays (see figure 40):
Note: The network settings (IP address, subnet mask, and
default gateway) are only active when DHCP is disabled.
Note: For the network information such as the IP address to be
active, the library must reboot. To reboot the library, see
“Reboot Library”
on page 126.
Comments to this Manuals