Quantum Pathlight VX User's Guide download pdf (Page 22)

18 Gathering Systems Assurance Information

Verifying Power Requirements

This section provides the power requirements for the Pathlight VX.

Table 8

lists power requirements for the installation site.

Table 9

lists the power consumption of the Pathlight VX components.

Table 8 Power Requirements for the Installation Site

Power Requirement

Volts AC 100-240 VAC +/- 10%

(50-60 Hz)

a. The Volts AC requirement is 240 VAC in Australia.

Amps 36 Amps maximum @ 100 VAC

b. The Amps requirement is for the 11.5 TB Standard Configuration. Entry-Level Configurations will

generate fewer Amps and High-Performance Configurations will generate more Amps.

Pre-racked Pathlight VX Power Requirements 2 NEMA L6-30 connectors

Table 9 Power Consumption of Pathlight VX Components

Component Power Consumption in Watts Amperage @ 110 VAC

SNC 176 watts 1.6A

FC switch 170 watts 1.54A

MS ~ 300 watts ~ 2.7A

AX100SC

a. AX100SC power consumption is doubled in the 4.2 TB Pathlight VX-450 because this configuration contains 2

AX100SC enclosures; 2 x 250 watts (500 watts total).

250 watts ~ 2.8A

DPE

b. Power consumption is greater in a High-Performance Configuration with more DPEs. For example, the 24.1 TB

High Performance configuration contains 3 DPEs, so it consumes 3 x 578 watts (1734 watts total) for the DPEs.

578 watts 5.4A

DAE

c. Power consumption is greater in each 5.9 TB increment. For example, the 17.7 TB Standard Configuration

contains 3 DAEs, so it consumes 3 x 294 watts (882 watts total) for the DAEs.

294 watts 2.71A

Pathlight VX-450 (Total) ~ 896 watts ~ 8.64A

Pathlight VX-650 (Total) ~ 1518 watts ~ 13.95A

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

No comments

Quantum Pathlight VX User's Guide Page 22