Quantum DX5000 User's Guide download pdf (Page 77)

Chapter 3 DX3000 and DX5000 Remote Management

Configuration

Quantum DX3000 and DX5000 User’s Guide 59

Table 8 Port Settings

Configuring the RAID Settings 3

The DX3000/DX5000 system allows you to remotely alter the RAID

configuration.

To access the RAID Configuration screen:

In the

Hardware page, click RAID.

The

RAID Configuration screen displays (see figure 38).

Field Description

Node World

Wide Name

(WWN)

The node WWN is the overall system

identification on the customer SAN. This field

allows you to set the WWN in case a controller

is replaced so the customer SAN will not

require remapping.

AL_PA and

Loop ID

This field allows you to set either a soft or hard

AL_PA. Soft allows the customer SAN to

automatically assign a loop ID to the DX3000/

DX5000 System. Hard allows you to manually

assign the loop ID. The Default setting is soft.

Speed

This field allows you to select the maximum

link speed of the Fibre Channel port (1GB/sec,

2GB/sec, or Automatic). The default setting is

Automatic.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 129 130

No comments

Quantum DX5000 User's Guide Page 77