Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 52
Configuring System
Hardware
3
The DX3000/DX5000 system allows you to remotely configure the
following hardware options:
• Configuring the Device Mappings
• Configuring the iSCSI Options
• Configuring the Fibre Channel Options
• Configuring the RAID Settings
Configuring the Device Mappings 3
The Device Mapping page allows you to map or assign DX3000/DX5000
virtual devices (robot, tape drives, and virtual disks) to specific iSCSI or
Fibre Channel ports. The default setting for both the DX3000 and DX5000:
• Ethernet port 1 is assigned the robot and tape drives 0 through 5.
To access the Device Mapping page:
1 In the Hardware page, click Device Mapping.
The management frame displays the Device Mapping page (see
figure 34).
Comments to this Manuals