Quantum DX5000 User's Guide download pdf (Page 61)

Chapter 3 DX3000 and DX5000 Remote Management

Configuration

Quantum DX3000 and DX5000 User’s Guide 43

4 Enter the alpha characters (0 to 6 characters) in the New Alpha Prefix

field.

5 Enter the numeric character in the Numeric Ending field.

6 When you have selected the tape(s) and both the alpha and numeric

characters, click

Apply.

Barcode labels are assigned for the selected tape(s).

7 Return the DX3000/DX5000 system to the on-line state (see

“Changing Library State” on page 84).

Configuring Library Properties 3

The library name identifies the DX3000/DX5000 system so it can be

distinguished from other devices on the network through the SNMP

interface.

To set the library name:

1 Set the DX3000/DX5000 system to the off-line state (see “Changing

Library State” on page 84).

2 From the Library link of the Configuration page, click the Properties

link.

The Properties page displays (see figure 27).

Note: If you are entering alpha characters for the first part of a

barcode number and this is the first number in a range, no

more than five characters can be used. This allows the

system to assign the last character in the field.

Note: This number is used as the first number in the range of

tape cartridges. The number will increment with each

additional cartridge in the field.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 129 130

No comments

Quantum DX5000 User's Guide Page 61