Quantum DX5000 User's Guide download pdf (Page 64)

Chapter 3 DX3000 and DX5000 Remote Management

Configuration

Quantum DX3000 and DX5000 User’s Guide 46

4 In the General section, select the port you wish to edit.

5 Edit the host and domain information as desired.

6 Click Apply.

Configuring the Date and

Time

The date and time can be set from the DX3000/DX5000 system web

pages. Setting the correct date and time allows the system to provide

accurate reports when events occur on the system.

Configuring the Date and Time 3

To access the Date and Time Configuration page:

1 In the Configuration page, click Date & Time.

The management frame displays the Date & Time Configuration page

(see

figure 30).

Network Mask

View or set the network mask for the DX3000/

DX5000 system

Link Speed &

Duplex

View and set the link speed and duplex for the

DX3000/DX5000 system (10/100/half/full/auto)

Note: If the system has DHCP enabled and cannot receive an IP

address from the DHCP server, the system will reset back

to the default IP address (10.1.1.1 for port 1 and 10.0.1.0 for

port 2). If the port is DHCP enabled, the DHCP server

provides the default gateway, domain name, and DNS IP

address, even though the user has entered values for these

fields.

Field Description

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 129 130

No comments

Quantum DX5000 User's Guide Page 64