Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 40
3 Edit the partition information as desired (see “Adding a Partition” on
page 36 for descriptions of the fields).
4 Click Apply.
5 Return the DX3000/DX5000 system to the on-line state (see
“Changing Library State” on page 84).
The partition is updated.
Deleting a Partition 3
To edit a partition:
1 Set the DX3000/DX5000 system to the off-line state (see “Changing
Library State” on page 84).
2 From the Partition page, click the link for the partition you wish to
delete.
The Edit Partition page displays (see figure 25).
3 Click Delete to delete the partition.
4 Return the DX3000/DX5000 system to the on-line state (see
“Changing Library State” on page 84).
The partition is deleted.
Setting Write Protection 3
Write protection, when enabled, prevents any data to be written to the
tape cartridge. This protects your important data from being over-
written. The cartridge will remain unavailable for further storage until
the write protection has been disabled.
To enable/disable write protection:
1 From the Library page, click the Write Protection link.
The Write Protection page displays (see figure 26).
Note: To add, edit, or delete a partition, the system must be offline.
Note: To enable or disable write protection, the system must be
offline.
Comments to this Manuals