Quantum Scalar i40 User's Guide download pdf (Page 242)

Chapter 8: Installing, Removing, and Replacing Components

Removing and Replacing a Magazine

216 Quantum Scalar i40 and Scalar i80 User’s Guide

• (4) M3 x 6 Phillips head screws

• (4) washers

Creating a Backup Map

of Cartridge Locations

When you transfer tape cartridges from the removed magazine into the

replacement magazine, each cartridge needs to go in the same slot

position it was in previously. One way to do this is to transfer the

cartridges one by one from one magazine to the other. However, if the

cartridges get mixed up or dropped, you need a backup method to

know where to place your cartridges. The library configuration report

provides a convenient backup “map.”

1 On

the Web client, select Reports > Library Configuration.

2 Click th

e Show Barcodes button.

The screen displays a map of the

library showing the location of

each cartridge, by barcode.

3 Click th

e “print” icon in the upper right corner to print the report.

Alternatively, take a screen capture of the report and save or print it,

or copy the map by hand.

Removing the

Magazine from the

Library

You can perform this procedure with library power on.

1 F

rom the operator panel, select Actions > Magazine.

2 Use the Up and Down buttons t

o select the magazine you want to

remove and press Release.

3 W

ait for the operator panel to display the message: “Magazine is

now unlocked. Waiting for the magazine to be moved to the

expected position.”

4 Pull

the magazine bezel out and remove the magazine from the

library. If you do not remove the magazine within 30 seconds, the

magazine locks again.

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 327 328

No comments

Quantum Scalar i40 User's Guide Page 242