Quantum Scalar i40 User's Guide download pdf (Page 70)

Chapter 4: Configuring the Library

Configuring SNMP Settings

42 Quantum Scalar i40 and Scalar i80 User’s Guide

Operator Panel

1 Select Setup > Network Configuration.

2 Modify the fields using the method described in Navigating and

Editing on the Operator Panel on page 25.

Web Client

Select Setup > Network Management > Network.

Configuring SNMP Settings

Simple Network Management Protocol (SNMP) is a light-weight

protocol designed for remote management and monitoring of

infrastructure devices. The library provides SNMP support, so an external

management application can be configured to receive library SNMP

information. The library supports SNMP by publishing a Management

Information Base (MIB) that can be queried to obtain the status of the

library and many of its individual components. SNMP information can

be obtained from the library using SNMP Traps and GET queries.

For more information about SNMP, see the

Scalar i40 and Scalar i80

Basic SNMP Reference Guide

(6-66773-xx).

For information on integrating MIBs with an SNMP management

application, contact your network management application vendor.

Registering External

Management

Applications

Administrators can register transport protocols, IP addresses, and port

numbers of external management applications to enable them to

receive SNMP traps from the library. (By default, the library ignores all

SNMP SET operations, so external management applications cannot

After registering the transport protocols, IP addresses, and

corresponding port numbers, you can perform a test to verify that the

library can send the SNMP traps to the addresses.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 339 340

No comments

Quantum Scalar i40 User's Guide Page 70