Quantum Scalar i40 User's Guide download pdf (Page 167)

Chapter 6: Performing Library Operations

Shutting Down, Restarting, Turning Off, and Removing Power

Quantum Scalar i40 and Scalar i80 User’s Guide 139

Web Client

1 Click the Logout button in the upper right corner of the screen,

or select Operations > Log Out.

2 Click OK to confirm.

Shutting Down, Restarting, Turning Off, and

Removing Power

It is important to shut down the library properly before turning off the

library or completely removing library power.

Caution: You should always perform a shutdown before turning off

the library or completely removing power. Otherwise, the

following could occur:

– The library may not complete closing all data and log

files.

– If you turn off power or unplug the power cord while

writing to tape, the data on the tape could become

corrupted.

– If you unplug the power cord, the robot may

become frozen in the middle of an operation and unable

to move once library power is restored, possibly

requiring a service call.

The steps for shutting down, turning off, and completely removing

library power are:

1 Make sure the connected host applications are not sending

commands to the library and that all library operations have

stopped.

2 Shut down the library using the operator panel or Web client (see

Shutting Down the Library on page 140).

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 339 340

No comments

Quantum Scalar i40 User's Guide Page 167