Quantum 200D/400D User's Guide download pdf (Page 48)

36 Troubleshooting and Diagnostics

After clearing error (cycle power if drive error), the LCD displays the following message:

Indicator State, Character, or Message

Status LED

Green, solid

Single-character

display

Off

LCD

Ultrium Tape Drive

Drive Empty

SCSI Wrap Test Function

This test performs a check of the SCSI circuitry from and to the SCSI connector.

To select the SCSI Wrap Test function, perform the following steps:

1. Verify that the drive is in Maintenance Mode shown when the Status LED is solid amber.

2. Press the Unload button once per second until the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

LCD

Maint Mode: Select

SCSI Wrap(Inst Plug)

Before selecting this function, attach a SCSI wrap plug (not provided in accessory kit; contact ATAC) to the drive SCSI

connector (in place of the SCSI cable).

3. Press and hold the Unload button for two seconds to select SCSI Wrap Test. The

drive automatically starts the test. The

front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

6, flashing

LCD

SCSI Wrap

Running!

If the test is successful, the test will loop and begin again.

4. Press the Unload button. The front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

LCD

Ultrium Tape Drive

Drive Empty

Then the drive will exit Maintenance Mode.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 64 65

Comments to this Manuals

No comments

Quantum 200D/400D User's Guide Page 48

Comments to this Manuals

Related products and manuals for Blank data tapes Quantum 200D/400D