Quantum 200D/400D User's Guide download pdf (Page 42)

30 Troubleshooting and Diagnostics

2. Press the Unload button once per second until the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

LCD

Maint Mode: Select

Update Drive FW

3. Press and hold the Unload button for two seconds to select Update Drive Firmware from FMR Tape. The front panel

indicators will display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

c, flashing

LCD

Update Drive FW

Load Drive FMR Tape

4. Within 60 seconds, insert the FMR cartridge (or the drive will exit Maintenance Mode).

When you have inserted the FMR cartridge, the drive begins loading the cartridge, and the front panel indicators display the

following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

2, flashing

LCD

Update Drive FW

Tape Loading =====

After the cartridge is loaded the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, flashing at 2 Hz

Single-character display

2, flashing

LCD

Update Drive FW

Locating =====

followed by:

Update Drive FW

Reading =====

The drive will load the updated firmware from the FMR tape into its erasable programmable read-only memory (EPROM)

area.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 64 65

Comments to this Manuals

No comments

Quantum 200D/400D User's Guide Page 42

Comments to this Manuals

Related products and manuals for Blank data tapes Quantum 200D/400D