Quantum 200D/400D User's Guide download pdf (Page 45)

Troubleshooting and Diagnostics 33

LCD

Create FMR Tape

Completed!

Followed by:

Cartridge Unloading

In Progress

Followed by:

Ultrium Tape Drive

Drive Empty

Then the drive will exit Maintenance Mode.

If the drive fails to create the FMR tape, it will retry the operation twice. If the failure continues, the front panel indicators

display the following:

Indicator State, Character, or Message

Status LED

Amber, flashing

Single-character display

7, flashing

LCD

Error!

Media Problem

To resolve the error, refer to Table 4-2 Error Codes, elsewhere in this chapter. To clear the error, cycle (remove, then

reapply) power to the LTO standalone.

Force a Drive Dump

To select the Force a Drive Dump function, perform the following steps:

1. Verify that the drive is in Maintenance shown when the Status LED is solid amber.

2. Press the Unload button once per second until the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

LCD

Maint Mode: Select

Force Drive Dump

3. Press and hold the Unload button for two seconds to select Force a Drive Dump. The front panel indicators display the

following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

4, flashing

which will change to:

0, solid

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 64 65

Comments to this Manuals

No comments

Quantum 200D/400D User's Guide Page 45

Comments to this Manuals

Related products and manuals for Blank data tapes Quantum 200D/400D