Quantum DAT 160 User's Guide Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
Chapter 3 Installing External Tape Drives
Connecting the SCSI Tape Drive
Quantum DAT 160 User’s Guide 27
Why the SCSI Bus Type
Important 3
The SCSI bus type determines the speed at which data can be transferred
between devices on the bus and the maximum length of cable that can be
used. The drives support a burst transfer rate of 160 MB/sec. To benefit
from this level of performance, it is important to ensure that the drives
are connected to a SCSI bus of a similar or higher specification. This
means that you need:
An Ultra160 or Ultra320 SCSI bus. If you attach the drive to a lower
specification SCSI bus, it will still work but data will not be
transferred as quickly.
LVD-rated SCSI cabling and terminators. The LVD interface enables
the data to be transferred at the drive's maximum rate.
Table 4 Supported SCSI Bus
Types
Reviewing the Drive
Default Settings 3
Your external tape drive comes with various default settings. You may
need to change these settings to suit your requirements. Review the
default settings in table 5
to determine whether they suit your
requirements or need to be changed.
Note: The drives are not compatible with high voltage differential
(HVD) SCSI devices.
SCSI Bus Type Supported
Ultra160 LVD, Ultra320
LVD
Yes. These are recommended
configurations.
Ultra2 LVD, Ultra Wide
LVD
Yes. These are supported, but
performance may be impaired.
Ultra wide, single-ended Yes. But this is not a recommended
configuration as it will restrict
performance.
Ultra narrow, single-ended Yes. But this is not recommended as it will
severely restrict performance and you will
need a suitable cable or adapter.
High Voltage Differential No. The drive will not work and you may
damage the drive or controller
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 81 82

Comments to this Manuals

No comments