Quantum DPA User's Guide download pdf (Page 26)

Installing the CP 3100 Installing an Internal CP 3100

Connecting to a Host and a Tape Drive

The following procedure describes how to connect the CP 3100 to an existing tape drive and to a

host. The CP 3100 can connect to a DDS-4 or DAT 72 tape drive. Making this connection allows

data on the CP 3100’s hard disk to be archived to the attached tape drive. This procedure requires

an existing DDS-4 or DAT 72 tape drive, and the VHDC-1 to HD68 converter and VHDC-1 to HD68

Archive Cable supplied with the CP 3100.

To connect the CP 3100 to a host and a tape drive:

1. Connect the supplied VHDC-1 to HD68 Archive Converter to the HOST SCSI connector

(upper connector) on the back panel of the CP 3100 (see

Figure 5 on page 26 and Figure 7

on page 27).

Figure 7. Connecting the VHDC-1 to HD68 Converter

2. Connect the supplied VHDC-1 to HD68 Archive Cable to the ARCHIVE SCSI connector

(lower connector) on the back panel of the CP 3100 (see

Figure 5 on page 26 and Figure 8

on page 27).

Figure 8. Connecting the VHDC-1 to HD68 Archive Cable

VHDC-1 converter

VHDC-1 connector

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 100 101

No comments

Quantum DPA User's Guide Page 26