Quantum PX720 Installation Manual download pdf (Page 34)

Quantum PX720 Unpacking and Installation Instructions

Document 6444602-04 A01

March 2005

34 Installing the Quantum PX720 Library

Refer to the Quantum PX720 FC470 Upgrade Instructions (PN 6444614) for

instructions on configuring the FC470 Fibre Channel bridge.

Loading the Tape

Cartridges

Before operating the library, load the appropriate tape cartridges (LTO or

SDLT) into the library starting with the left-hand panels (refer to the Quantum

PX720 User’s Guide PN 6444601 for more information on tape cartridges).

Initial Configuration 0 The Quantum PX720 must be initially configured with an IP address before

the remote management software is available.

To configure the Quantum PX720 IP address:

1 Press on the top of the service tray to tip it down and press the power

button to turn on the library (see figure 31

Figure 31 Turning on the

Library

2 When the library completes the boot up sequence and the OCP is active,

press

Menu from the Home screen.

The OCP displays the

Menu screen (see figure 32):

Power button

Service tray

1 2 ... 29 30 31 32 33 34 35 36 37 38

No comments

Quantum PX720 Installation Manual Page 34