Quantum PX720 Installation Manual download pdf (Page 22)

Quantum PX720 Unpacking and Installation Instructions

Document 6444602-04 A01

March 2005

22 Unpacking the Library

Figure 23 Panel Shipping

Restraints Storage

Locations

Storing the Shipping

Materials

To store the shipping and packaging materials for future use:

1 Detach the ramp and place on top of the pallet.

2 Fold the shipping bag.

3 Place the shipping bag, foam cap, screws, internal library frame restraint,

and other packaging materials on the pallet.

4 Collapse the cardboard box.

5 Place the cardboard box on top of the packaging materials on the pallet.

6 Secure the pallet, packaging materials, and cardboard box for future use.

Leveling the Library 0 To level the library:

1 Rotate each foot of the library until it makes contact with the floor.

2 Rotate each foot an additional 1/4 turn with the open-end wrench to

begin raising the library.

3 Center a carpenter’s level on the top front edge of the library.

4 Check the gauge on the level. If the front of the library is level, proceed to

step 6

. If it is not level:

a Determine which side of the library is low.

b Adjust the leveling foot on the low side of the library by rotating the

leveling foot with the open-end wrench.

Left storage position shown

Panel restraint

storage locations

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

No comments

Quantum PX720 Installation Manual Page 22