Quantum DAT 160 User's Guide download pdf (Page 28)

Chapter 2 Installing Internal Tape Drives

Attaching USB Cable

13 Quantum DAT 320 User’s Guide

Connecting the USB

Cable to the Server

To an Internal USB 2.0 Port

1 Use the schematic on the inside of the server panel to check

whether your server has an internal USB 2.0 port and locate its

position.

2 Use the appropriate cable to connect to the server.

• A standard 5-pin USB Type B cable is provided with the tape

drive (see Figure 5

Figure 5 Connecting to a 5-pin

USB Port

To a n E x te r n a l U S B 2 . 0 P o r t

Purchase a special USB cable and Cable Routing Kit. The Cable Routing

Kit consists of a bracket with attached cable on one side that connects

External USB port standard

USB cable

Cable routing kit is required.

To an . . . Use . . . Notes

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

No comments

Quantum DAT 160 User's Guide Page 28